RUF 4-11 Individually customised metal presses

The advantages for you at a glance:

  • For small to medium quantities of metal chips
  • Short amortisation period
  • Recovery of cooling lubricants
  • Fully automatic 24h operation possible
  • Long service life & low maintenance requirements

Increased value through the briquetting of metal chips

Unsere Our RUF 4-11 metal press series is best suited to small to medium quantities of metal chips. The value of your metallic residues can be increased through the process of briquetting. At the same time, expensive cooling lubricants are recovered, which our briquette presses squeeze out of the damp metal chips. The throughput is between 40 and 300 kg/hour, depending on the material to be briquetted. The briquette machines can be adapted to your individual requirements.

RUF Brikettierpresse für Metall RUF 4
RUF Brikettierpresse für Metall RUF 11
RUF Brikettierpresse Detail
Detailansicht RUF Brikettierpresse
RUF Briketts aus Metall
RUF Brikettierpresse für Metall RUF 4
RUF Brikettierpresse für Metall RUF 11
RUF Brikettierpresse Detail
Detailansicht RUF Brikettierpresse
RUF Briketts aus Metall

Technical data RUF 4-11

Max. throughput rate (kg/h) Aluminium 60-300
Max. throughput rate (kg/h) Brass, bronze, cooper 100-220
Max. throughput rate (kg/h) Magnesium 40-50
Max. throughput rate (kg/h) Steel & Castings 100-200
Max. throughput rate (kg/h) Titan 65-130
Power (kW) 4, 5,5, 11
spec. Pressure, max. (kg/cm²) 600 - 3.700
briquette formats (mm) 60x40, 60x60, Ø60, Ø80
Size (m) Lenght x Width x Hight 1,3 x 1,5 x 1,9 bis 1,6 x 1,6 x 1,95
ca. weight (t) 1,4 - 1,8 t

Briquette formats in
mm

60x40Ø80Ø6060x60

Downloads

Download free informational material here

Flyer MetallRUF UnternehmensbroschüreFormular kostenfreie Probeverpressung

Witali Helmut Technical Manager & Sales

More than 25 years experience in briquetting at RUF

Tanja Huber Rental & Pressing Tests

More than 12 years experience in briquetting at RUF

Bernd Ellenrieder Sales management

More than 15 years experience in briquetting at RUF

Andreas Jessberger Sales management

More than 15 years experience in briquetting at RUF

Berthold Golsner Sales & IT

More than 20 years experience in briquetting at RUF

Carina Gebler Marketing & Technical Documentation

5 years professional experience in marketing

Jens Wöllenweber Sales Force

15 years sales experience, more than 5 years at RUF

Manuel Schmid Sales & Project Management

More than 8 years experience in briquetting at RUF

Nico Nuscheler Marketing & Technical Documentation

3 years professional experience in marketing

Rita Behringer Sales & Logistic

More than 15 years experience in briquetting at RUF

Roland Ruf Managing Director

More than 15 years in the company, managing director for more than 10 years

Wolfgang Ruf Managing Director

More than 30 years in the company, managing director for more than 10 years

Stefan Schulz Sales & Project Management

15 years sales experience, more than 2 years at RUF

Request a free test pressingDownload information sheet "pressing test"

Frequently Asked Questions

How do I find the right briquetting machine?

We have many years of experience in briquetting which means that our experts are well-qualified to provide you with professional advice in choosing the right briquette press. We work with you to identify your individual requirements on the basis of the material in question and the production conditions. This then allows us to offer you custom-made briquetting machines or even complete briquetting solutions.

What is the smallest amount of chips that makes briquetting worthwhile?

Briquetting can be worthwhile even with very small quantities of chips. Briquette presses with a lower throughput should be considered here. Depending on the material, our systems can make economic sense in these cases too. Our specialists will be happy to advise you!

What are the requirements for producing briquettes?

In general, almost all materials can be made into briquettes. However, the chip particles should not be bigger than 50mm. The chips should not contain any impurities. For Wood & Biomass the moisture content should be less than 12 % (max 15 %).

zurück
[Translate to Englisch:]