RAPBriquette press for metal with various different versions

The advantages for you at a glance:

  • Perfect for smaller amounts of chips
  • Short amortisation period
  • Fully automatic 24h operation possible
  • Long service life
  • Low maintenance costs
  • Recovery of expensive cooling lubricants

Briquetting metal chips and increasing their value

Smaller quantities of metal chips that are produced as a waste product in the metal processing industry can be briquetted with the RUF integration press (RAP). The value of metal residues can be greatly increased through briquetting with RUF chip presses. Another advantage lies in the recovery of cooling lubricants, especially oil. RUF briquetting machines for metal can be individually customised to customer-specific requirements.

RUF Brikettierpresse RAP für Metallspäne
Metallspäne brikettieren
Stahlspäne brikettieren
Aluspäne brikettieren
RUF Brikettierpresse RAP für Metallspäne
Metallspäne brikettieren
Stahlspäne brikettieren
Aluspäne brikettieren

Technische Daten RAP

Max. throughput rate (kg/h) Aluminium30-50
Max. throughput rate (kg/h) Brass, bronze, cooper50-100
Max. throughput rate (kg/h) Magnesium20
Max. throughput rate (kg/h) Steel & Castings30-80
Max. throughput rate (kg/h) Titan20-50
Power (kW)4
spec. Pressure, max. (kg/cm²)1.600-3.800
briquette formats (mm)60x40, 60x60, 80x40
Size (m) Lenght x Width x Hightca. 1,3x1,0x1,6
ca. weight (t)1

Briquette formats in
mm

60x4060x6080x40

Witali HelmutTechnical Manager & Sales

More than 25 years experience in briquetting at RUF

Tanja MillerRental & Pressing Tests

More than 12 years experience in briquetting at RUF

Berthold GolsnerSales & IT

More than 20 years experience in briquetting at RUF

Carina FischerMarketing & Technical Documentation

5 years professional experience in marketing

Jens WöllenweberSales Force

15 years sales experience, more than 5 years at RUF

Manuel SchmidSales & Project Management

More than 8 years experience in briquetting at RUF

Nico NuschelerMarketing & Technical Documentation

3 years professional experience in marketing

Rita BehringerSales & Logistic

More than 15 years experience in briquetting at RUF

Roland RufManaging Director

More than 15 years in the company, managing director for more than 10 years

Wolfgang RufManaging Director

More than 30 years in the company, managing director for more than 10 years

Stefan SchulzSales & Project Management

15 years sales experience, more than 2 years at RUF

Bernd EllenriederSales management

More than 15 years experience in briquetting at RUF

Andreas JessbergerSales management

More than 15 years experience in briquetting at RUF

Request a free test pressingDownload information sheet "pressing test"

Frequently Asked Questions

How is a test pressing done? Is it done free of charge?

Test pressing is done free of charge and without any obligation on your part, and is carried out in our Technical Centre using your own material. At your request, you can be present at the test pressing. The results are important for the choice of the briquetting machine – for example, briquette thickness, residual moisture, durability to withstand handling, the amount of cooling lubricants recovered, etc.

What is the smallest amount of chips that makes briquetting worthwhile?

Briquetting can be worthwhile even with very small quantities of chips. Briquette presses with a lower throughput should be considered here. Depending on the material, our systems can make economic sense in these cases too. Our specialists will be happy to advise you!

What are the requirements for producing briquettes?

In general, almost all materials can be made into briquettes. However, the chip particles should not be bigger than 50mm. The chips should not contain any impurities. For Wood & Biomass the moisture content should be less than 12 % (max 15 %).

zurück