RUF 75-90Metal presses with maximum power Made in Germany
The advantages for you at a glance:
- For large quantities of metal chips
- Short amortisation period
- Recovery of cooling lubricants
- Low melting loss and thus higher smelting yield
- Increased revenues from briquettes as opposed to loose chips
- Fully automatic 24h operation possible
- Long service life & low maintenance costs
Briquetting metal residues and increasing value
The RUF 75-90 series is ideally suited to briquetting large quantities of metal chips (e.g. aluminium, steel, brass, titanium, etc.) that are produced as a waste product of the metal processing industry. The value of metal residues can be greatly increased through briquetting into high-quality briquettes. In addition, cooling lubricants can be recovered and then reused. If the briquettes are smelted, the melting loss is significantly less and the smelting yield therefore higher than is the case with loose chips. On the basis of our many years of experience, we are able to respond flexibly to customer-specific requirements and offer individually customised solutions.
Technische Daten RUF 75-90
| Max. throughput rate (kg/h) Aluminium | 900-2.400 |
|---|---|
| Max. throughput rate (kg/h) Brass, bronze, cooper | 3.000-5.000 |
| Max. throughput rate (kg/h) Magnesium | 730-950 |
| Max. throughput rate (kg/h) Steel & Castings | 2.300-3.000 |
| Max. throughput rate (kg/h) Titan | 800-1.600 |
| Power (kW) | 75, 90 |
| spec. Pressure, max. (kg/cm²) | 2.500 - 3.900 |
| briquette formats (mm) | Ø120, Ø150 |
| Size (m) Lenght x Width x Hight | ca. 3,8 x 3,8 x 2,5 |
| ca. weight (t) | 12 t |
Briquette formats in
mm
mm
 |  |
| Ø120 | Ø150 |
|---|
Downloads
Download free informational material here
Flyer MetallRUF UnternehmensbroschüreFormular kostenfreie Probeverpressung
Witali HelmutTechnical Manager & Sales
More than 25 years experience in briquetting at RUF
Tanja MillerRental & Pressing Tests
More than 12 years experience in briquetting at RUF
Bernd EllenriederSales management
More than 15 years experience in briquetting at RUF
Andreas JessbergerSales management
More than 15 years experience in briquetting at RUF
Berthold GolsnerSales & IT
More than 20 years experience in briquetting at RUF
Carina FischerMarketing & Technical Documentation
5 years professional experience in marketing
Jens WöllenweberSales Force
15 years sales experience, more than 5 years at RUF
Manuel SchmidSales & Project Management
More than 8 years experience in briquetting at RUF
Nico NuschelerMarketing & Technical Documentation
3 years professional experience in marketing
Rita BehringerSales & Logistic
More than 15 years experience in briquetting at RUF
Roland RufManaging Director
More than 15 years in the company, managing director for more than 10 years
Wolfgang RufManaging Director
More than 30 years in the company, managing director for more than 10 years
Stefan SchulzSales & Project Management
15 years sales experience, more than 2 years at RUF
Request a free test pressingDownload information sheet "pressing test"
Frequently Asked Questions
How do I find the right briquetting machine?
We have many years of experience in briquetting which means that our experts are well-qualified to provide you with professional advice in choosing the right briquette press. We work with you to identify your individual requirements on the basis of the material in question and the production conditions. This then allows us to offer you custom-made briquetting machines or even complete briquetting solutions.
What is the smallest amount of chips that makes briquetting worthwhile?
Briquetting can be worthwhile even with very small quantities of chips. Briquette presses with a lower throughput should be considered here. Depending on the material, our systems can make economic sense in these cases too. Our specialists will be happy to advise you!
What are the requirements for producing briquettes?
In general, almost all materials can be made into briquettes. However, the chip particles should not be bigger than 50mm. The chips should not contain any impurities. For Wood & Biomass the moisture content should be less than 12 % (max 15 %).