RUF 500Briquette press for wood & biomass with maximum flexibility

The advantages for you at a glance:

  • Fully automatic 24h operation possible
  • Long service life & low maintenance costs
  • Individually tailored solutions
  • Consistent highly compacted briquettes
  • Compact construction
  • More than 35 years’ experience

Added value through highly compacted briquettes

The briquetting process allows increased revenues to be earned from biogenic residues that are produced as a waste product, such as wood, paper, straw or textile dust. Our RUF 400 briquette press for biomass and wood is perfectly suited to medium quantities of chips and residues thanks to its performance in terms of throughput. It is important that the water content of the starting material is below 15 %. Briquettes of a consistently high quality and density can then be produced. The systems in our biomass series offer the maximum in flexibility and can be individually tailored to your requirements and directly incorporated into your production facilities.

RUF Brikettpresse für Biomasse
RUF verschiedene Brikettformate
RUF Briketts verschiedener biogener Reststoffe
Hackschnitzel brikettieren
Kaffeesatz brikettieren
Individuelle Brikettformate
RUF Brikettpresse für Biomasse
RUF verschiedene Brikettformate
RUF Briketts verschiedener biogener Reststoffe
Hackschnitzel brikettieren
Kaffeesatz brikettieren
Individuelle Brikettformate

Technische Daten RUF 500

Max. throughput rate (kg/h) Biomass500
Max. throughput rate (kg/h) PU200-400
Power (kW)22
spec. Pressure, max. (kg/cm²)1.700
briquette formats (mm)150x60 x 150x70, 150x75
Size (m) Lenght x Width x Hight2,0 x 2,0 x 2,1
ca. weight (t)3,7 t

Briquette formats in
mm

150X75150X70150X60

Witali HelmutTechnical Manager & Sales

More than 25 years experience in briquetting at RUF

Tanja MillerRental & Pressing Tests

More than 12 years experience in briquetting at RUF

Bernd EllenriederSales management

More than 15 years experience in briquetting at RUF

Andreas JessbergerSales management

More than 15 years experience in briquetting at RUF

Berthold GolsnerSales & IT

More than 20 years experience in briquetting at RUF

Carina FischerMarketing & Technical Documentation

5 years professional experience in marketing

Jens WöllenweberSales Force

15 years sales experience, more than 5 years at RUF

Manuel SchmidSales & Project Management

More than 8 years experience in briquetting at RUF

Nico NuschelerMarketing & Technical Documentation

3 years professional experience in marketing

Rita BehringerSales & Logistic

More than 15 years experience in briquetting at RUF

Roland RufManaging Director

More than 15 years in the company, managing director for more than 10 years

Wolfgang RufManaging Director

More than 30 years in the company, managing director for more than 10 years

Stefan SchulzSales & Project Management

15 years sales experience, more than 2 years at RUF

Request a free test pressingDownload information sheet "pressing test"

Frequently Asked Questions

How long is the service life of a machine?

RUF briquette presses are very robust and are known for having a low level of wear and tear. Some of our systems have been in use for more than 25 years. 

What are the requirements for producing briquettes?

In general, almost all materials can be made into briquettes. However, the chip particles should not be bigger than 50mm. The chips should not contain any impurities. For Wood & Biomass the moisture content should be less than 12 % (max 15 %).

What is the smallest amount of chips that makes briquetting worthwhile?

Briquetting can be worthwhile even with very small quantities of chips. Briquette presses with a lower throughput should be considered here. Depending on the material, our systems can make economic sense in these cases too. Our specialists will be happy to advise you!

zurück