RUF 400 Customisable briquette press for wood & biomass

The advantages for you at a glance:

  • Fully automatic 24h operation possible
  • Long service life & low maintenance costs
  • Customisable
  • Compact construction
  • No addition of binding agents
  • More than 35 years’ experience

Briquetting biomass & increasing revenue

Our RUF 400 briquette press is ideally suited to briquetting medium quantities of chips. All biogenic residues, such as wood, agricultural residues, paper or textile dust, can be pressed into highly compacted briquettes, without the addition of binding agents. It is important that the water content of the material is below 15 %. The systems in our biomass series can be individually tailored to your requirements and directly incorporated into existing production systems. This means you can earn higher revenues and reduce costs for storage, handling and transport.

RUF Brikettpresse für Biomasse
RUF verschiedene Brikettformate
RUF Briketts verschiedener biogener Reststoffe
Hackschnitzel brikettieren
Kaffeesatz brikettieren
Individuelle Brikettformate
RUF Brikettpresse für Biomasse
RUF verschiedene Brikettformate
RUF Briketts verschiedener biogener Reststoffe
Hackschnitzel brikettieren
Kaffeesatz brikettieren
Individuelle Brikettformate

Technical data RUF 400

Max. throughput rate (kg/h) Biomass 360
Max. throughput rate (kg/h) PU 140-280
Power (kW) 22
spec. Pressure, max. (kg/cm²) 1.700
briquette formats (mm) 150x60 x 150x70, 150x75
Size (m) Lenght x Width x Hight 1,8 x 1,9 x 2,1
ca. weight (t) 3,6 t

Briquette formats in
mm

150x75150x70150x60

Downloads

Download free informational material here

Flyer BiomasseRUF UnternehmensbroschüreFormular kostenfreie Probeverpressung

Witali Helmut Technical Manager & Sales

More than 25 years experience in briquetting at RUF

Tanja Miller Rental & Pressing Tests

More than 12 years experience in briquetting at RUF

Bernd Ellenrieder Sales management

More than 15 years experience in briquetting at RUF

Andreas Jessberger Sales management

More than 15 years experience in briquetting at RUF

Berthold Golsner Sales & IT

More than 20 years experience in briquetting at RUF

Carina Gebler Marketing & Technical Documentation

5 years professional experience in marketing

Jens Wöllenweber Sales Force

15 years sales experience, more than 5 years at RUF

Manuel Schmid Sales & Project Management

More than 8 years experience in briquetting at RUF

Nico Nuscheler Marketing & Technical Documentation

3 years professional experience in marketing

Rita Behringer Sales & Logistic

More than 15 years experience in briquetting at RUF

Roland Ruf Managing Director

More than 15 years in the company, managing director for more than 10 years

Wolfgang Ruf Managing Director

More than 30 years in the company, managing director for more than 10 years

Stefan Schulz Sales & Project Management

15 years sales experience, more than 2 years at RUF

Request a free test pressingDownload information sheet "pressing test"

Frequently Asked Questions

How long is the service life of a machine?

RUF briquette presses are very robust and are known for having a low level of wear and tear. Some of our systems have been in use for more than 25 years. 

What are the requirements for producing briquettes?

In general, almost all materials can be made into briquettes. However, the chip particles should not be bigger than 50mm. The chips should not contain any impurities. For Wood & Biomass the moisture content should be less than 12 % (max 15 %).

What is the smallest amount of chips that makes briquetting worthwhile?

Briquetting can be worthwhile even with very small quantities of chips. Briquette presses with a lower throughput should be considered here. Depending on the material, our systems can make economic sense in these cases too. Our specialists will be happy to advise you!

zurück