RUF 11-22 Various different briquette solutions for metal chips
The advantages for you at a glance:
- For medium to large quantities of metal chips
- Short amortisation period
- Recovery of cooling lubricants
- Low melting loss and higher smelting yield
- Fully automatic 24h operation possible
- Long service life & low maintenance requirements
De-watering, de-oiling & briquetting in one
If medium to large quantities of metal chips are produced through metal processing, the best solution for briquetting is to use our RUF 11-22 series metal presses which give you the opportunity to earn additional revenue. Added to this is the recovery of expensive cooling lubricants, which are squeezed out of the damp metal chips and can be reused. RUF offers individually-tailored briquetting solutions for various different metallic residues and adapts their systems precisely in line with specific customer requirements.
Technical data RUF 11-22
| Max. throughput rate (kg/h) Aluminium | 130-700 |
|---|---|
| Max. throughput rate (kg/h) Brass, bronze, cooper | 150-1.150 |
| Max. throughput rate (kg/h) Magnesium | 60-155 |
| Max. throughput rate (kg/h) Steel & Castings | 200-850 |
| Max. throughput rate (kg/h) Titan | 140-550 |
| Power (kW) | 11, 15, 22 |
| spec. Pressure, max. (kg/cm²) | 1.700 - 5.000 |
| briquette formats (mm) | 150x60, 150x75, 150x120, Ø60, Ø70, Ø80, Ø100 |
| Size (m) Lenght x Width x Hight | ca. 2,7 x 2 x 2,2 |
| ca. weight (t) | 3,3 x 3,9 t |
Briquette formats in
mm
mm
 |  |  |  |  |  |  |
| 150x60 | Ø80 | Ø100 | Ø70 | Ø60 | 150x120 | 150x75 |
|---|
Downloads
Download free informational material here
Flyer MetallRUF UnternehmensbroschüreFormular kostenfreie Probeverpressung
Witali Helmut Technical Manager & Sales
More than 25 years experience in briquetting at RUF
Tanja Huber Rental & Pressing Tests
More than 12 years experience in briquetting at RUF
Bernd Ellenrieder Sales management
More than 15 years experience in briquetting at RUF
Andreas Jessberger Sales management
More than 15 years experience in briquetting at RUF
Berthold Golsner Sales & IT
More than 20 years experience in briquetting at RUF
Carina Gebler Marketing & Technical Documentation
5 years professional experience in marketing
Jens Wöllenweber Sales Force
15 years sales experience, more than 5 years at RUF
Manuel Schmid Sales & Project Management
More than 8 years experience in briquetting at RUF
Nico Nuscheler Marketing & Technical Documentation
3 years professional experience in marketing
Rita Behringer Sales & Logistic
More than 15 years experience in briquetting at RUF
Roland Ruf Managing Director
More than 15 years in the company, managing director for more than 10 years
Wolfgang Ruf Managing Director
More than 30 years in the company, managing director for more than 10 years
Stefan Schulz Sales & Project Management
15 years sales experience, more than 2 years at RUF
Request a free test pressingDownload information sheet "pressing test"
Frequently Asked Questions
How do I find the right briquetting machine?
We have many years of experience in briquetting which means that our experts are well-qualified to provide you with professional advice in choosing the right briquette press. We work with you to identify your individual requirements on the basis of the material in question and the production conditions. This then allows us to offer you custom-made briquetting machines or even complete briquetting solutions.
What is the smallest amount of chips that makes briquetting worthwhile?
Briquetting can be worthwhile even with very small quantities of chips. Briquette presses with a lower throughput should be considered here. Depending on the material, our systems can make economic sense in these cases too. Our specialists will be happy to advise you!
What are the requirements for producing briquettes?
In general, almost all materials can be made into briquettes. However, the chip particles should not be bigger than 50mm. The chips should not contain any impurities. For Wood & Biomass the moisture content should be less than 12 % (max 15 %).